Architectuur — Overzicht & Netwerksegmentatie¶
Project: SASE Proof of Concept
Datum: 31-05-2026
Component: Algemene architectuur, netwerksegmentatie, IP-plan en VM-verdeling
Dit document beschrijft de fysieke en netwerkarchitectuur van de SASE Proof of Concept: welke VMs en LXC's bestaan, hoe ze zijn gesegmenteerd over drie Proxmox-bridges, welke IP-adressen ze hebben en welk teamlid welk component beheert. Voor de logische data flow zie 02-Functioneel-schema; voor stap-voor-stap verkeersanalyse zie 03-Pakketflow-uitleg.
Architecturale principes¶
| Principe | Toepassing in de PoC |
|---|---|
| Inline core | VM1 is de enige doorgangsroute tussen LAN en WAN — alle verkeer passeert OPNsense |
| Volledige segmentatie | Drie aparte Proxmox-bridges (WAN / LAN / Mirror), geen IP op LAN/Mirror op Proxmox-niveau |
| Out-of-band monitoring | Zeek ontvangt LAN-verkeer via SPAN/mirror — passieve detectie zonder productie-impact |
| Identity-centric | Microsoft Entra ID is de centrale identity bron; alle policies (ZTNA, SWG, CASB) zijn identity-gebaseerd |
| One source of truth | IP-tabel + netwerkdiagram in dit document — alle andere docs verwijzen hierheen |
Component-overzicht¶
| VM / LXC | Functie | Componenten | Verantwoordelijke | Rubric-categorie |
|---|---|---|---|---|
| VM1 | PoP Node (Inline Core) | OPNsense, Squid + SSL-bump, Suricata, Unbound DNS | Hennie + Youness + Dali | SWG + SD-WAN |
| LXC1 | ZTNA Controller | Headscale (legacy) / NetBird Management | Rieam | ZTNA |
| VM2 | Content inspectie | School ICAP Guard + ClamAV | Youness | SWG / CASB |
| VM3 | NDR Sensor | Zeek + RITA | Dali | SWG (NDR) |
| VM4 | SIEM | Wazuh | Hennie | Algemene Beoordeling |
Netwerksegmentatie¶
Drie Proxmox Linux-bridges scheiden het verkeer:
| Bridge | Naam | Functie | IP op Proxmox |
|---|---|---|---|
vmbr0 |
WAN | Uplink naar schoolnetwerk (10.155.0.0/16) |
10.155.205.1/24 |
vmbr1 |
LAN | Intern projectsegment (192.168.50.0/24) |
— (geen IP) |
vmbr2 |
Mirror | Passieve SPAN naar Zeek | — (geen IP) |
Belangrijk:
vmbr1envmbr2krijgen geen IP op Proxmox-niveau. Anders wordt Proxmox de gateway in plaats van OPNsense, wat de hele inline-architectuur breekt. OPNsense moet de enige gateway zijn voor het LAN-segment.
Voor de OPNsense-configuratie van deze bridges (NICs, IP-instelling, SPAN-mirror via tc) zie SWG — OPNsense Configuratie.
Netwerkdiagram¶
flowchart LR
subgraph WAN[WAN / Bletchley network 10.155.0.0/16]
direction LR
CampusGW["Bletchley Router<br/>Default GW: 10.155.0.1"]
PublicDNS["Upstream DNS<br/>1.1.1.1"]
Proxmox["Proxmox Host (Bletchley)<br/>Role: Hypervisor<br/>vmbr0: 10.155.205.1/24<br/>GW: 10.155.0.1<br/>DNS: 1.1.1.1"]
OPN_WAN["VM1 OPNsense (PoP Node)<br/>WAN vtnet0 - vmbr0<br/>IP: 10.155.205.11/16<br/>GW: 10.155.0.1<br/>DNS: 1.1.1.1"]
Proxmox -->|Default route| CampusGW
OPN_WAN -->|Default route| CampusGW
OPN_WAN -->|DNS queries| PublicDNS
end
subgraph LAN[LAN / Project network 192.168.50.0/24]
direction LR
OPN_LAN["VM1 OPNsense<br/>LAN vtnet1 - vmbr1<br/>IP: 192.168.50.1/24<br/>Acts as GW + DNS for LAN"]
Headscale["LXC1 ZTNA Controller<br/>eth0 - vmbr1<br/>IP: 192.168.50.10/24<br/>GW: 192.168.50.1<br/>DNS: 192.168.50.1"]
ICAP["VM2 ICAP Server<br/>eth0 - vmbr1<br/>IP: 192.168.50.12/24<br/>GW: 192.168.50.1<br/>DNS: 192.168.50.1"]
ZeekMGMT["VM3 Zeek + RITA (MGMT)<br/>eth0 - vmbr1<br/>IP: 192.168.50.13/24<br/>GW: 192.168.50.1<br/>DNS: 192.168.50.1"]
SIEM["VM4 SIEM Server<br/>eth0 - vmbr1<br/>IP: 192.168.50.14/24<br/>GW: 192.168.50.1<br/>DNS: 192.168.50.1"]
Headscale -->|GW 192.168.50.1| OPN_LAN
ICAP -->|GW 192.168.50.1| OPN_LAN
ZeekMGMT -->|GW 192.168.50.1| OPN_LAN
SIEM -->|GW 192.168.50.1| OPN_LAN
end
subgraph MIRROR ["MIRROR / SPAN network vmbr2 (no IPs)"]
direction LR
OPN_MIR["VM1 OPNsense<br/>Mirror-out OPT1 vtnet2 - vmbr2<br/>IP: none"]
ZeekSniff["VM3 Zeek Sniff Interface<br/>eth1 (sniff) - vmbr2<br/>IP: none<br/>Passive capture"]
OPN_MIR -->|"Mirrored traffic (SPAN)"| ZeekSniff
end
subgraph BR["Proxmox L2 Fabric (Linux Bridges)"]
direction TB
vmbr0["vmbr0<br/>WAN bridge<br/>Bridge port: nic0<br/>Proxmox IP: 10.155.205.1/24"]
vmbr1["vmbr1<br/>LAN bridge (internal)<br/>No bridge ports<br/>No IP on Proxmox"]
vmbr2["vmbr2<br/>Mirror bridge (internal)<br/>No bridge ports<br/>No IP on Proxmox"]
end
Proxmox -.L2.-> vmbr0
OPN_WAN -.L2.-> vmbr0
OPN_LAN -.L2.-> vmbr1
Headscale -.L2.-> vmbr1
ICAP -.L2.-> vmbr1
ZeekMGMT -.L2.-> vmbr1
SIEM -.L2.-> vmbr1
OPN_MIR -.L2.-> vmbr2
ZeekSniff -.L2.-> vmbr2
OPN_LAN -->|"NAT + policy (Squid/Suricata)<br/>LAN to WAN"| OPN_WAN
Note1["Key points<br/>- LAN default gateway: 192.168.50.1 (OPNsense)<br/>- WAN default gateway: 10.155.0.1 (Bletchley)<br/>- Mirror network has no IPs; L2 copy only<br/>- Prefer management via LAN; WAN MGMT only if allowed"]
Note1 --- OPN_LAN
classDef wanNode fill:#dc262633,stroke:#dc2626,stroke-width:2px;
classDef lanNode fill:#2563eb33,stroke:#2563eb,stroke-width:2px;
classDef mirNode fill:#16a34a33,stroke:#16a34a,stroke-width:2px;
classDef hostNode fill:#ea580c33,stroke:#ea580c,stroke-width:2px;
classDef brNode fill:#6b728033,stroke:#6b7280,stroke-width:1.5px,stroke-dasharray: 4 3;
classDef noteNode fill:#ca8a0433,stroke:#ca8a04,stroke-width:1.5px,stroke-dasharray: 4 3;
class CampusGW,PublicDNS,OPN_WAN wanNode;
class OPN_LAN,Headscale,ICAP,ZeekMGMT,SIEM lanNode;
class OPN_MIR,ZeekSniff mirNode;
class Proxmox hostNode;
class vmbr0,vmbr1,vmbr2 brNode;
class Note1 noteNode;
IP-tabel¶
| Node | Rol | Verkeer | Type | Interface | Bridge | IP | Gateway | DNS |
|---|---|---|---|---|---|---|---|---|
| Proxmox (Bletchley) | Hypervisor | WAN | Host | vmbr0 |
vmbr0 |
10.155.205.1/24 |
10.155.0.1 |
1.1.1.1 |
| Proxmox (Bletchley) | Hypervisor | LAN | Host | vmbr1 |
vmbr1 |
— | — | — |
| Proxmox (Bletchley) | Hypervisor | Mirror | Host | vmbr2 |
vmbr2 |
— | — | — |
| VM1 | PoP Node (OPNsense) | WAN | VM | vtnet0 (WAN) |
vmbr0 |
10.155.205.11/16 |
10.155.0.1 |
1.1.1.1 |
| VM1 | PoP Node (OPNsense) | LAN | VM | vtnet1 (LAN) |
vmbr1 |
192.168.50.1/24 |
— | — (OPNsense) |
| VM1 | Mirror-out | Mirror | VM | vtnet2 (OPT1) |
vmbr2 |
— | — | — |
| LXC1 | ZTNA Controller | LAN | LXC | eth0 |
vmbr1 |
192.168.50.10/24 |
192.168.50.1 |
192.168.50.1 |
| VM2 | ICAP Server | LAN | VM | eth0 |
vmbr1 |
192.168.50.12/24 |
192.168.50.1 |
192.168.50.1 |
| VM3 | Zeek + RITA | LAN | VM | eth0 (mgmt) |
vmbr1 |
192.168.50.13/24 |
192.168.50.1 |
192.168.50.1 |
| VM3 | Zeek sniffing | Mirror | VM | eth1 (sniff) |
vmbr2 |
— | — | — |
| VM4 | SIEM Server (Wazuh) | LAN | VM | eth0 |
vmbr1 |
192.168.50.14/24 |
192.168.50.1 |
192.168.50.1 |
Documentatie-map¶
Detailconfiguratie per component:
| Component | Documentatie |
|---|---|
| OPNsense (firewall + routing + platform) | 01-SWG/Documentatie/04-OPNsense-Configuratie |
| Squid + SSL-bump | 01-SWG/Documentatie/01-Squid-Configuratie |
| School ICAP Guard + ClamAV | 01-SWG/Documentatie/02-ICAP-Configuratie |
| Suricata IDS | 01-SWG/Documentatie/03-Suricata-Configuratie |
| Unbound DNS-filtering | 01-SWG/Testen/03-DNS-filtering |
| NetBird + Entra ID (ZTNA) | 03-ZTNA/Documentatie/01-Configuratie |
| Wazuh SIEM | (in opbouw — zie 05-Algemene-Beoordeling/Testen/01-Transparantie-en-logging) |
Bronnen¶
- Gartner SASE-definitie: https://www.gartner.com/en/information-technology/glossary/secure-access-service-edge-sase
- Proxmox VE — Linux bridges: https://pve.proxmox.com/wiki/Network_Configuration